Basic Info.
Type
Injection Blow Molding Machine
Making Method of Parison
Extrusion-Blow Molding
Computerized
Computerized
Certification
CE, ISO9001:2008, QS
Suitable Bottle Size
30L-150L
Suitable Material
HDPE/PS
Parison Controller
100 Points
Mechanical Robot
Available
Production Per Hour
45~50 PCS/H
Average Power Consumption
35kw~40kw
Mould Material
S50c,Aluminium,S136 as Option
Transport Package
Iron Tray or Wooden Case
Specification
4800x2300x3500mm
Product Description
Large storage blow molding machine
★The whole computer control, product the efficiency high;
★Change the Frequency adjust soon, can consume low;
★Humanize the mold structure and safe productions of locks device, safety good;
★The center enters to anticipate the piston type to keep anticipating the machine head; Pure anticipate and turn the color very quick;
★an go together with to order the degree of thickness controller more, vivid control each parts of wall of hollow product thick and strength, the product quality is higher, the material cost even economizes;
★The orientation processes the product capacity: 5L-200L;
★Apply the material: The PE, PP.
dragon blow moulding machine
★The whole computer control, product the efficiency high;
★Change the Frequency adjust soon, can consume low;
★Humanize the mold structure and safe productions of locks device, safety good;
★The center enters to anticipate the piston type to keep anticipating the machine head; Pure anticipate and turn the color very quick;
★an go together with to order the degree of thickness controller more, vivid control each parts of wall of hollow product thick and strength, the product quality is higher, the material cost even economizes;
★The orientation processes the product capacity: 5L-200L;
★Apply the material: The PE, PP, PS.
Technical Parameter of HMT-Y120
SPECIFICATION | Material | UNIT | PE,PP… |
Max container capacity | L | 150 |
Number of die | set | 1 |
Output(dry cycle) | pcs/hr | 300 |
Machine Dimension | m | 6.0×2.9×4.8 |
Total weight | ton | 18 |
ACCUMULATOR HEAD | Accumulator capacity | L | 15 |
Power of die heating | KW | 30 |
Number of heating zone | zone | 6 |
Die diameter | mm | 500 |
Injection pressure | Mpa | 8 |
Max.injection speed | Kg/sec | 1.5 |
CLAMPING UNIT | Clamping force | KN | 650 |
platen opening stroke | mm | 400-1000 |
platen size | mm | 1200×1200 |
Max mould size | mm | 900×120 |
Mould thickness | mm | 510-700 |
EXTRUDER UNIT | Screw diameter | mm | 110 |
Screw L/D ratio | L/D | 25:1 |
Extruding Volume | Kg/hr | 180-280 |
Screw rotation rate | r/min | 10-86 |
Extruder heating power | KW | 28 |
Extruder driving power | KW | 50-75 |
POWER CONSUMPTION | Oil pump power | KW | 37 |
Servo motor power | KW | 4 |
General assembly power | KW | 150-180 |
Average energy consumption | KW | 60-75 |
Air pressure | Mpa | 0.7 |
Air consumption | m³/min | 1.0 |
Cooling water consumption | m³/min | 0.6 |
Machine configuration
Item | Setting |
1. Hydraulic system | Oil pump: Rexroth (Germany) Hydraulic valve: YUKEN (Japan) Proportional valve: YUKEN (Japan) Oil pressure control: double proportional pressure control Seal assembly: Walka.(Japan) |
2. Electrical system | PLC: SIEMENS (Germany)Touch screen: SIEMENS (Germany)Inverter: Zlyj1-200-II (China)Parison control: (TaiWai)Electric relay: SCHNELDER (Japan)Proximity switch: FOTEK (TaiWai)AC contactor: SIEMENS (Germany)Control switch: SCHNELDER (France)Air-break switch: SIEMENS (Germany) |
3. Clamping unit | Mode: Bi-directional synchronous structure to clamp the mould Driving mode: differential fast mould motion with double pulling rods to assure large container volume |
4. Die | Runner: First-in first-out Material of runner parts: 38CrMoAlA 42CrMo Mode: accumulator head |
5. Extruder | Driving mode: Frequency control Reducer gearbox: hard surface gear of alloy-steel Material of barrel & screw: fine quality nitride steel 38CrMoAlA Screw head: Plate abrasive-resistant alloy Heater: Cast aluminum heater |
6.Pnaumatic parts | Main valves: (China) |
7.Motor | Origin: FengSheng (China) |
Address:
Building 1, Building C, Building 12, Shangxiu Industrial Zone, Gangzhu Garden, Guangming New District, Shenzhen, China
Business Type:
Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Bags, Cases & Boxes, Computer Products, Light Industry & Daily Use, Manufacturing & Processing Machinery, Packaging & Printing, Sporting Goods & Recreation, Tools & Hardware, Toys, Transportation
Management System Certification:
ISO 20000, HSE, QHSE, HQE
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.